How to debug the ultra-fine pulverizer machine?

The process of commissioning the animal feed ultra-fine pulverizer:

(1) At this time, take a sample in the finished product area to test the fineness of the finished powder. When the fineness exceeds the index, the speed of the grading wheel can be adjusted downward.

(2) Every time the rotation speed of the grading wheel is adjusted, a period of time should be taken to test the fineness of the finished powder.

(3) Whenever the rotation speed of the grading wheel decreases, the current of the main engine will also decrease. At this time, the feeding frequency can be gradually increased to increase the crushing output.

(4) At the same time, adjust the opening range of the air door of the high-pressure fan, and detect the current of the high-pressure fan, not only to ensure a certain air volume, but also to allow the fan to work normally for a long time.

(5) If the output and fineness are not up to the requirements due to material differences, the rotation direction of the grading wheel can also be the same as that of the main engine. Other debugging methods are the same as above.